Description
- DETECTOR PREAMPLIFIER
- WIDEBAND
- LOW NOISE
- CURRENT MODE
- AC COUPLED
- FOR PHOTOVOLTAIC DETECTORS
- WITH DETECTOR BIAS CIRCUIT
|
SPECIFICATION:
| Gain (Voltage) | 1.0x104/RD
|
| Transimpedance Factor | 10 K Ohm |
| Noise Density | 1 nV/Hz.51.5pA/Hz.5 |
| Bandwidth | 100 Hz to 20 MHz |
| Output level | 20V p-p |
| Output impedance | 50 Ohms |
| Power required | +12 V -12 V @ 35mA +15V -15V |
| Mechanical Size | 63MM. x 57MM x 33MM. |
| Connectors (standard) | BNC/BNC in/out |
RD=detector impedance.
Note: Two mounting holes are provided on one edge of amplifier,
tapped for screw size 4-40, one inch spacing.
|